High Efficiency Central Solid Four-claw Feeding Chuck for Laser Pipe Cutter
1. Description
This kind of chuck is back chuck and also is feeding chuck. It is commonly used for work-piece clamping, rotating and front and back feeding. It is also like main chuck which can be used as an independent spindle when using. The function is also to clamp the work-piece tightly when rotating.
Rotating air inlet can be realized through tail-mounted gyrator so that the rapid clamping and loosening action can be achieved. The working air source adopts the principle of continuous air supply.
When fixing the base of chuck, connecting the matched motor with the gear and compressed air source, it can realize clamping and driving the work-piece to rotate.
Because the length of the parts processed by the cutting equipment is longer, the back chuck and the matched main chuck are often installed in pairs on the equipment.
The structure of this chuck is four-jaw automatic synchronization centering structure and also is solid center. Kindly recommend it to be used in tube sheet integrated machine and it is suitable for cutting square and circular tube sheet.
2. Performance Parameters
| | W160A-25 |
| | 25mm |
| | 4.8KN |
| | 0.4-0.9MPa |
| | 500r/min |
| | 15-160mm |
| | 150mm |
| | 0.1kg.m2 |
| | 21kg |
| | 44kg |
3. Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | L | M | N | O | R | S | T |
| W160A-25 | 280 | 150 | 290 | 295 | 120 | 85 | 245 | 94 | 0 | 130 | 152 | 11 | 16 | 5 | 12 | 6-M8 | 13 | 265 |
4. Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
| e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5. Production Line
